Regulating Phase Junction and Oxygen Vacancies of TiO2 Nanoarrays for Boosted Photoelectrochemical Water Oxidation

In this study, we have provided a facile solution to synthesize well-aligned titanium dioxide nanorods by using hydrothermal reaction. By calcining the materials under different atmospheres and temperatures, a batch of titanium dioxides with excellent oxygen evolution reaction(OER) catalytic efficiency were obtained. This new structured TiO₂ photoanode material yields a high photocurrent density of 5.69 mA/cm² at 1.23 V vs. reversible hydrogen electrode(RHE) under simulated solar light(100 mW/cm²). Surface photovoltage techniques and other measurements were carried out to confirm that the enhanced photoelectrochemical performances were attributed to the synergistic effect of the phase junction and a certain content of surface states, which accelerate the separation and transmission of the photogenerated charges. This material with phase junction and surface states promises a potential application in the field of photoelectric catalysis under solar light.     

Mobility of water molecules in Li+, Na+ and Cs+ ionic forms of Nafion membrane studied by NMR

Correlation times and diffusion coefficients of water molecules were measured for the first time by ¹H spin relaxation and pulsed field gradient NMR in Li⁺, Na⁺ and Cs⁺ ionic forms of Nafion 117 membrane. Hydration numbers of Li⁺, Na⁺ and Cs⁺ cations were calculated. It was shown that at high humidity macroscopic transfer is controlled by the local translational motion of water molecules.     

海蛎壳粉废弃物负载CuCl_2作为高效、廉价以及可回收催化剂合成炔胺类化合物(英文)

发展了一种经济、简单的海蛎壳粉负载的CuCl2异相催化剂OSP-CuCl2,用来催化醛-炔-胺之间的A3偶联反应.OSP-CuCl2容易通过简单的方法从海蛎壳粉以及CuCl2制备,且显示出高的催化活性以及良好的可循环回收性.在微波辅助以及无溶剂条件下,以OSP-CuCl2为催化剂,能够以高产物收率制备出一系列炔胺类化合物.OSP-CuCl2可通过简单的过滤方式进行回收,并至少可循环使用6次.初步放大实验表明,炔胺类化合物能够以150 mmol的规模制备(87%收率).     

Comparison of a single-use pH test strip and a glass electrode for potentiometric titration

The potentiometric titration of a carbonate mixture or an acetate solution is a common experiment in analytical laboratories. Typically, a glass electrode combined with a calomel or Ag/AgCl reference electrode is used to locate the equivalence points in neutralization titrations. The dissociation constants of weak acids and bases can be calculated from the pH at the half-neutralization point. Recently, a new commercial product for measuring pH has been developed. This novel acid–base detection strip is a single-use sensor that requires neither storage in a preservation liquid nor calibration prior to use. This study examined its suitability for the continuous monitoring of pH changes in potentiometric titrations of carbonate mixtures, acetate solutions, or ammonia solutions. There were no significant differences in the concentrations of solutions tested using a glass electrode and a pH test strip. The pK_a, pK_b, and pH values determined using the two systems differed by less than 5%. The results confirmed that the pH strips are suitable for continuously monitoring pH changes during neutralization titrations. However, the strips can only be used once.     

钢渣与污泥协同资源化研究进展

钢渣和污泥作为传统大宗固体废弃物,始终面临处理成本高、回收利用率低等问题,但其内部含有大量可利用物质,具有较高的资源化利用价值,现已成为国内外的研究热点。为了提高钢渣与污泥绿色、高效、协同资源化利用,综述了近年来国内外钢渣在建筑、道路、水处理、农业等领域资源化利用的研究进展,立足固废无害化、减量化,从钢渣和污泥的资源化进行分析与总结,指出不同研究方法的特点和优劣,为固废资源化利用提供参考。并基于我国发展现状对钢渣与污泥资源化利用的未来发展方向进行了展望,以期为固废处理行业的良性发展提供一定的理论支撑。     

Construction and application of carbon nanotube/polypyrrole-based bacterial surface imprinted sensorEI北大核心CSCD

A simple and fast "non-hole" bacteria surface imprinted (SPBIP) impedance sensor was constructed for ultrasensitive detection of Salmonella. The SPBIP sensor was prepared by one step electropolymerization of pyrrole (functional monomer), single-walled carbon nanotube (SWNT, nano-modulator), and Salmonella(template) onto a glassy carbon electrode. After removing the bacterial template, "non-hole" imprinted sites were formed on the surface of the polymer matrix, allowing the target bacteria to be specifically recognized. The resulting changes in the electrode surface impedance could be used to detect the target bacteria. The effects of the amount of SWNT, polymerization cycles, eluents, elution time and recognition time on the recognition ability of the sensor were investigated. Under the optimal conditions, the sensor could be used to detect 10~1×107 CFU/mLSalmonella with the limit of detection of 3.5 CFU/mL. The sensor could be used for the detection of salmonella in drinking water and orange juice samples with the recoveries ranging from 95.4% to 109.5%. © 2023, Youke Publishing Co.,Ltd. All rights reserved.     

Z型CdIn2S4/ZnSnO3异质结的构筑及其光催化产氢性能

通过高温煅烧ZnSn(OH)₆前驱体制备了双壳中空立方体结构的ZnSnO₃(ZSO),进而采用水热法将CdIn₂S₄(CIS)纳米晶包裹在ZSO表面,成功制备了CdIn₂S₄/ZnSnO₃(CIS/ZSO)异质催化剂。活性产氢实验结果表明,CIS、ZSO物质的量之比为12%时制备的12% CIS/ZSO具有优异的光催化产氢性能,在3 h内产氢量为1 676.48 μmol·g^-1,分别是ZSO和CIS的12倍和8倍。ZSO光催化析氢反应活性的增强归因于CIS/ZSO异质结构的成功构建,异质界面的形成显著提高了光生电子/空穴对的分离效率,降低了其复合率。通过对电荷转移路径的分析,提出了可能的反应机理。     

Recycling of polyethylene terephthalate (PET Or PETE) plastics – An alternative to obtain value added products: A review

Waste management is become one of the world's most pressing issues. Plastic is one of the most widely utilised materials in the modern world. Plastic manufacturing and usage have risen globally in recent decades due to its low weight and outstanding mechanical properties. Plastic has a wide range of applications due to such good properties include lightweight, high strength, and extended durability. Because of plastics are non- or low-biodegradable, a vast quantity of plastic waste is generated every day, making waste disposal the most pressing matter globally. Furthermore, improper waste disposal pollutes the environment. An ecologically friendly approach is necessary to locket these issues. One of the solutions is to recycle this sort of garbage. There are many plastic recycling technologies available, however practically all of them have certain restrictions. Chemical recycling of plastic, on the other hand, has been shown to be more efficient than other recycling methods. This article provides a quick overview of chemical recycling of PET post-consumer waste and the synthesis of potentially value-added products such as dye or dyestuffs, bolaform surfactant, bio-degradable polyesters, drug carrier, Metal-organic framework (MOF), bio-degradable polymeric scaffolds, polyurethane foam and coating materials etc.     

Combinatorial Screening of Water/Proton Permeation of Self-Assembled Pillar[5]arene Artificial Water Channel Libraries

Artificial water channels (AWCs) that selectively transport water and reject ions through bilayer membranes have potential to act as synthetic Aquaporins (AQPs). AWCs can have a similar osmotic permeability, better stability, with simpler manufacture on a larger-scale and have higher functional density and surface permeability when inserted into the membrane. Here, we report the screening of combinatorial libraries of symmetrical and unsymmetrical rim-functionalized PAs A – D that are able to transport ca. 10⁷–10⁸ water molecules/s/channel, which is within 1 order of magnitude of AQPs’ and show total ion and proton rejection. Among the four channels, C and D are 3–4 times more water permeable than A and B when inserted in bilayer membranes. The binary combinations of A – D with different molar ratios could be expressed as an independent (linear ABA ), a recessive (inhibition AB , AC , DB , ACA ), or a dominant (amplification, DBD ) behavior of the water net permeation events.     

Surface modification of date palm activated carbonaceous materials for heavy metal removal and CO2 adsorption

In this study, high surface area activated carbon (AC) was prepared from a local palm tree (Phoenix Dactylifera) using a variety of metal carbonates activators and finally achieved an excellent S_BET of 2700 m²/g when Cs₂CO₃ was used as an activating agent at a temperature of 600 °C. Surface modification of AC was carried out using various nitrogen transporting agents, resulting in N-doped ACs with nitrogen content varying from 4.0 to 11.4 %, depending on the functionalizing agents and activators used. The bimodal (presence of micro- as well as meso-porosity) ACs with such excellent surface properties were studied for their CO₂ uptake capacity at two different temperatures (0 and 25 °C) by isotherms recorded at pressure 1 bar and showed a remarkable uptake ability of 3.52 mmol/g (at 25 °C) and 5.6 mmol/g (at 0 °C), respectively. Also, batch experiments with variable pH, contact time, adsorbate concentrations, adsorbent dose, and temperatures were evaluated to understand the mechanism of sorption phenomena of Cr(VI) and Pb(II) achieving > 99.9 % removal capacity by the prepared ACs. Depending on the heavy metal ions being investigated, it was revealed that the pH of the solution and the amount of adsorbent had a direct impact on the total adsorption ability. Nitrogen atoms doped into the carbon frameworks were found to enhance the adsorption in the case of Pb(II) while the removal of Cr(VI) appeared to be unaffected. Maximum adsorption for Cr(VI) was observed at pH 2 and was determined to follow Freundlich isotherm while that of Pb(II) was observed at pH 7 and follows Langmuir isotherm. Best adsorption was found at an adsorbate concentration of 10 ppm and an adsorbent dose of 10 g/L. Kinetic modeling parameters showed the applicability of pseudo-second-order model perfectly.